What are the precautions for the use of centrifugal sedimentation machine?

Centrifugal sedimentation machine is an essential instrument in the laboratory. It has the characteristics of stable operation, light weight, beautiful appearance and simple operation. It is a huge centrifugal force generated by a high-speed rotating motor. When it is used, it should be in accordance with the requirements of the manual. Today, I will give you a detailed introduction to the precautions for the use of centrifugal sedimentation machines.

1. When using the centrifugal sedimentation machine, place it on a solid and flat surface. After the power is turned on, first turn on the power switch, select the timing to the working time you need, or adjust the speed. The knob rotates clockwise to the desired speed.

2. When placing the socket and the plug, be sure to have a good grounding wire. The quality of the test tube and the test sleeve must pass, and they must be equal and cannot be used in non-equal conditions.

3. Before using the centrifugal sedimentation machine, it should be cleaned and disinfected first. The temperature of cleaning and disinfection should not exceed 50 degrees. In the first three months of use, the motor should be filled with lubricating oil once. If the wear of the carbon brush is found, When it is less than ten millimeters, replace it with a new one.

4. After the use is completed, clean the plastic protective tube with a clean rag to avoid corrosion. When not in use, place the centrifugal sedimentation machine at a relative humidity of less than 80%, and it is well ventilated and non-corrosive.

The function of the centrifugal sedimentation machine is to allow the mixture of different sizes and densities to precipitate under the centrifugal condition, so as to achieve the purpose of separation, mainly for qualitative and quantitative separation of urine, serum and plasma, when used, Be sure to follow the above instructions to achieve proper use and storage. In addition, when choosing a centrifugal sedimentation machine manufacturer, you should choose a regular company, preferably the product is three bags.