How to maintain a vacuum defoaming mixer

It is well known that vacuum defoaming mixers are very convenient to use because they are already fully automated. But as long as it is a machine, it will inevitably fail or age, so we also need to maintain and maintain the vacuum defoaming mixer. So how do you maintain a vacuum defoaming mixer?

First, when using a vacuum defoaming mixer, daily inspections are required. For example, check if the switch screw of the vacuum defoaming mixer is normal or if the asbestos disc above the spindle is pressed. If the asbestos disc is not working tight, you need to add a asbestos rope with oil. If the daily maintenance work is done well, then the vacuum defoaming mixer will naturally be able to maintain a good state for a longer period of time.

Secondly, when using the vacuum defoaming mixer, it is also necessary to check whether the various connections of the machine are normal. Make sure that the machine is in good condition to work, otherwise it will cause considerable damage to the machine and reduce the service life of the machine. . When using it every day, you need to refuel the axle to make it more lubricated.

Finally, if it is a newly purchased vacuum defoaming mixer, it needs to be idling for a few minutes without load bearing to make sure that the machine is working properly. If the machine is abnormal, you need to contact the merchant for repair or replacement. Never put the vacuum defoaming mixer you just bought into work. This may not only have a certain impact on the vacuum defoaming mixer, but may even threaten the safety of the operator.

Vacuum defoaming mixers should also be noted during maintenance. The body will heat up during daily use, but the temperature must be kept below 60 °C. At the same time, it is also necessary to check the tightness of the vacuum defoaming mixer. As long as the above maintenance work of the vacuum defoaming mixer is completed, it is believed that the service life of the vacuum defoaming mixer can be effectively extended.